Message 2/8
Date: 16-Apr-12 @ 12:27 PM -
RE: Connecting my mixer
Hi.
The USB connection allows the main stereo mix to be sent to your computer
Mac doesn;t need drivers, so you will need to go to Logic main menu: preferences/audio
choose the Devices tab / core-audio - and assign the behringer usb as the audio in/out
now whatever is routed to the Behringer main L/R out will be routed in to Logic's audio tracks, and Logic's main L/R output will be routed back in stereo to the Behringer.
It is important to make sure you're monitors are connected NOT to the main L/R output on the Behringer, but instead connect your monitors to the Behringer PHONES stereo 1/4" output - This output is for Headphones or monitors - you will need a special cable - stereo 1/4" (TRS) - to 2 x rca-phono or 2 X 1/4" for your monitors.
Next to the PHONES/CTRL ROOM knob, is 3 buttons marked "SOURCE" - the choices are:
2-TR/USB
SUB 1-2
MAIN MIX
Pressing 2-TR USB will route Logic's stereo out back to your monitor output/speakers, while the main L/R stereo out on the Behringer continues to route IN to Logic.
If instead you want to route the main L/R OUT from the behringer to your speakers, ythen press the button MAIN MIX
___________________________________
"In other countries, art and literature are left to a lot of shabby bums living in attics and feeding on booze and spaghetti, but in America the successful writer or picture-painter is indistinguishable from any other decent business man!" - Babbit