Message 5/26
Date: 04-Jan-11 @ 06:10 PM Edit: 05-Jan-11 | 12:54 AM -
RE: Full user guide - Behringer BCF2000 & Logic Pro
Hi,
first of all I wanted to congratulate with the BCF2000 video tutorial author. It's a really great tutorial!!!
Now, I need some help...
I have a BCF2000 and I followed the video tutorial. But I have some problems.
I use a iMac 2.6 Ghz with mac OS X 10.6.2 and Logic Pro 9.1.1 and the BCF2000 firmware is 1.10
I connect the BCF2000 via USB with the power off. Then I open Logic and I switch on the BCF2000 holding the 3rd top bottom to the left until the display show first "LC" and then "EG". Then I set up the knobs as in the video tutorial, (u-1, auto, id, 100, 10)…. Then I press the exit button and nothing happen….the BCF2000 display shows 'LC" and in Logic the control setup doesn't pop up as I see in the video tutorial. Any led on the BCF2000 is off but the knobs and when I move the faders after 1 sec they go all the way to the bottom by themselves. I repeated a million times this procedure without any luck.
So I tried to configure manually the Logic Control in Logic Control Setup. I added a Mackie Logic Control then I have assigned midi Out e In to BCF2000 and tried to reboot the BCF2000, even holding the 3rd button and checking the setting again (u-1, auto, id, 100, 10). After I repeated a lot of times this procedure all of the sudden the BCF2000 worked properly and I don't really know how, as I never changed a thing. So the BCF2000 was working fine as in the video tutorial, showing on the display the Fader/Pan Mode, EQ Mode, Plugin Mode, Send Mode, the faders worked fine and linked with the Logic Mixer, and everything seems ok……..Then I quit Logic and I switched off the BCF2000. But as soon as I restarted Logic and switched on the BCF2000 here we go again….it didn't work!!!
So I tried and tried again with any luck... BUT, as before, all of the sudden the BCF2000 worked properly... BUT as before, as soon as I restarted Logic and BCF2000 nothing worked anymore….So in the end it worked twice after i tried a million times the installing process!!!
I am really going crazy!!!
Could be something wrong with the BCF2000 or is there something I don't do properly?
To help to understand my problem I loaded a short video here:
http://www.youtube.com/watch?v=DljKo-W-myU
It shows the configuration process and my problem at the end of it
Hope it can help
Could you help me please