Message 3/3
Date: 19-Oct-03 @ 09:35 AM -
RE: Roland_JUNO 60
Your battery has gone. You need to get it replaced. No biggie. It it soldered to the board. I can't recall the exact location, but it's a five minute job. Just open up the top plate, and it should be sitting on the board. It's should be almost as big around as a dime, and maybe as much as an inch long. Leads soldered to each end. Just find it, clip the leads, and solder them to the fresh one. You cold even be slick and use a little silicone to help anchor the battery to the board. Good luck.
Ape