Message 10/10
Date: 28-Feb-03 @ 05:39 PM -
RE: Drum Sub Groups
Hiya Dom. This is what I do:-
I usually fill the first 14 channels of my Mackie with drum stuff. This all gets squashed with Logics compressors where need be. Then I send all the drums into my 1st stereo comp via buss 1&2.
My bass gets shoved through a mono compressor via an insert.
Then I shove all my soft synths (music) through my 3rd stereo comp via bus 3&4.
Then everything gets put through my Mixmaster via the main mix inserts. I only squash the whole mix by about 3db though.
Hope that helps.