Message 2/3
Date: 11-Aug-00 @ 01:08 PM -
RE: FZTools
Hi tsb,
330H is the hex value. The default settings for the 401 are interrupt=2 (you're probably using 7 since this is your printer port default) and the address is value is 330H.
I'd suggest contacting the maker of the interface that you are using and confirm that it is 100% MPU 401 compatible.
Also be warned that FZ Tools is a DOS program, and does NOT well under Windows (even in DOS mode). I've had good luck with it using a real 401 card and using the MIDI interface of a couple different sound cards. Be sure that the cards are set-up for the default values of the 401 (you can change it is FZ Tools, but it is one less problem you'll have to deal with).
Good luck, Mike