Message 4/7
Date: 27-Jun-00 @ 02:08 PM -
RE: asrx and syjet drive problem
Hi,
Try powering up the Syjet first with the disk inserted. I don't have an ASR-X myself but I use a Syjet with an E-mu E-5000 Ultra and it works fine. I always power up the Syjet first and the E-mu recognizes it. There is no need to re-scan it afterwards then.
Syjets are a little flakey, I must admit. If I had to do it all over again, I would probably go with a regular hard drive internally (or in an external case) and archive to CD. Sometimes mine will spit out after a few seconds as well. I simply push the cartridge back in and then it behaves. Try that.
Good luck,
Fernando