Original
Message 1/6
Date: 23-Mar-00 @ 02:09 PM -
MIDI Ghost in my MPCxL
Hi ganag I posted this question in the Music/tech chat but I hope I get better luck with some XL owners...here's the
problem: my Xbase is set on ch10 my microwave is on ch1-8, I'm start to sequence and I go
on to part 4 in my MW (ch4) and the Xbase suddenly triggers that part with its drumbeat (not via
the 3 xtra midi tracks but my the simple 909 beat running on it) how the hell!!?? the Xbase is set
to ch10!!! the MW is on ch4!! but here's what kills me: I set the part 4 to a different channel and
its ok... I set the midi track in my MPC to respond to that ch and its ok. but as soon as I touch a
knob which sends midi on my Xbase it will start triggering the MW agian...its like the Xbase is
configured to trigger it (like a Controller), I tried connecting the Xbase straight into the MW,
and it fine ..so its the MPC! the monitor input shows I'm getting MIDI data on ch 10 and the
monitor output will change its output to whatever ch the MW is set on as soon as I set the track
on the MPC to its corresponding channel and touch a midi knob on my Xbase!, there's no data
recorded on the track, this is somkind of midi configuration inside my XL. Please help me.......this is killing me