Original Message 1/8                 Date: 16-Dec-99  @  10:22 PM   -   self-sevice was a big mistake!

noliveir2eden.rutgers.edu

Posts:

Link?:  No link

File?:  No file

I tried to install the output expander (IB300p, or something) on my S2000 and now when I turn it on it with the startup disk in it just says "insert sytem disk". I know I have to take it to a pro for repair, but, just so I can sleep tonight, can somebady tell me that they did the same thing and their sampler was not ruined for good? Am I panicking, or might I have killed my sampler?

[ back to forum ]               [quote]

Message 2/8                 Date: 17-Dec-99  @  03:14 AM   -   RE: self-sevice was a big mistake!

casparproject

Posts:

Link?: Link

File?:  No file

Hey man, have you checked to make sure you didn't disconnect the disk drive? I did this on my MPC2KXL, and it had the same type of message. Email me if you have any luck, but I'll betcha you just tugged the disk drive cable a bit when you opened her up and the connections loose.

Peaceout
Peter

[ back to forum ]               [quote]

Message 3/8                 Date: 17-Dec-99  @  12:59 PM   -   RE: self-sevice was a big mistake!

noliveir

Posts:

Link?:  No link

File?:  No file

Thanks for the reply--I'll try it and let you know. BTW what do you think of the effects board? How does in compare to a Midiverb, or other comparable units?

[ back to forum ]               [quote]

Message 4/8                 Date: 30-Dec-99  @  07:30 PM   -   RE: self-sevice was a big mistake!

xoxos

Posts: 6231

Link?: Link

File?:  No file

can't offer any better suggestions than checking your connex, but i installed my outputs fine.. i know nothing about electronics, but i've probably fixed about a dozen problems in my life just by physically examining the components, replacing stuff that looks screwed, or traces to the buttons that don't work, et c. good luck  

[ back to forum ]               [quote]

Message 5/8                 Date: 06-Jan-00  @  10:04 AM   -   RE: self-sevice was a big mistake!

doro

Posts:

Link?:  No link

File?:  No file

i cant get any buttons to work on my mpc2000 is there something else i should press to get them working any help please

[ back to forum ]               [quote]

Message 6/8                 Date: 11-Jan-00  @  03:51 PM   -   RE: self-sevice was a big mistake!

Ellipsis

Posts: 275

Link?:  Link

File?:  No file

you dont need to have the disk in the drive...the output expansion has it onboard, i believe....

[ back to forum ]               [quote]

Message 7/8                 Date: 11-Jan-00  @  06:43 PM   -   RE: self-sevice was a big mistake!

R-Tek

Posts:

Link?:  No link

File?:  No file

Doro - have you just got the MPC? Or have you installed an optional extra?

[ back to forum ]               [quote]

Message 8/8                 Date: 12-Jan-00  @  01:57 AM   -   RE: self-sevice was a big mistake!

delta_m_music

Posts:

Link?: Link

File?:  No file

I've an Akai S2000 expanded with 32MB ram and the EB-16 effects-board. I installed both myself and don't experience any problems. The quality of the EB-16 is great. I can easilily compete a Midiverb, actually, it is even better!

[ back to forum ]               [quote]