Message 2/2
Date: 07-Nov-06 @ 12:51 AM -
RE: Korg_ELECTRIBE ESX 1
This is for the EMX not the ESX you could always try.
1. While the unit is off simultaneously hold down the "TRANSPOSE "key(solo key) and "WRITE"key turn the unit power on.
2. The display will indicate "PRELOAD" and the PLAY/ PAUSE will blink.
3.If you want to load the PELOAD" data press the blinking PLAY/PAUSE key
it can take 30 seconds or more.
If you want to stop hit CANCEL.
When loading is complete your unit should be INITIALISED starting at pattern A01.
Hope this helps.